The Apple M1 Thunderbolt port is not as fast as advertised

Recent tests show that M1 microphone The Thunderbolt port transfer speed is not as fast as Apple advertises. The good news is that this doesn’t affect internal units, which are generally the most commonly used weapons and in some cases the only weapons some users have access to. However, higher speeds can negatively affect professional video editors or anyone who relies on super-fast external weapons for everyday use.

Remote backup is generally used to back up data if there is a problem with the main unit or if the operating system is infected by a computer virus. Anyway, Time Machine backups on Mac computers may not be as fast. But more important is trust. In some cases, very slow media is used when large amounts of accurate information are enabled. For example, some companies use storage units to store thousands of data offline at a relatively low cost. 1 petabyte equals 100 terabytes, which would cost hundreds of thousands of dollars in a solid state unit.

Embedding backup storage may not be that fast, some users expect higher transfer costs to meet required tasks such as editing video in 4K or 8K resolution. In some cases, computers need to simultaneously access multiple streams of high-bandwidth content for picture-in-picture transitions and effects. At some point, the disturbance below the pattern can cause problems. A recent test by Mac Howard Oakley artist and developer of Light Eclética Company shows that the Thunderbolt door transfer speed is much slower than expected. All M1 systems should support USB 3.1 Gen 2 up to 10 Gb/s, seems to have some issues with ideal bandwidth. In some cases, 5 Gb per second is shown as the maximum, which is the expected tax rate. The good news is that the USB 3.2 storage offers consistent transfers of 10 Gb/s, although Apple doesn’t claim to be compatible with the standard. USB 3.2 has a maximum transfer load of 20 Gb/s, but only 10 Gb/s.

Getting information about weapon range is not easy. The combination of several components needs to be verified for clarity and it seems Oakley has done it completely and asked two other people to verify it. The components to consider are the computer to be used for the test, the software to be used for the test, the ports to be connected, the cables to be connected and finally the external unit. If any of these fall below the recommended pattern, it will affect the results.

If these tests are accurate, the M1 Mac won’t be able to run at the maximum speed required with USB 3.1 Gen 2. That’s deceiving, but there are some workarounds. Using USB 3.2 storage connected directly to the Thunderbolt port on the Mac M1, it achieves transfer rates of 10 gigabits per second, with a noise and bandwidth load of approximately 910 and 970 megabits per second. This is very fast and offers a solution for the most demanding applications. M1 microphone For users with USB 3.1 Gen 2 units, using the USB port in the Thunderbolt 3 Dock or Studio Display seems to be the best option.

source: Companhia de Luz Eclética

Leave a Reply

Your email address will not be published.